ISO-rated aluminum T-slot flow racks built with particle-generating-free materials, non-outgassing anodized finishes, and wipe-down compatible lane surfaces — engineered for ISO Class 5 through 8 cleanroom environments in semiconductor, electronics, and pharmaceutical facilities.
Hard anodized and sealed aluminum profiles produce no particle shedding under normal use. The sealed surface resists chemical cleaning agents and prevents oxide particle release during wipe-down and equipment operation cycles.
Frame profiles, fasteners, lane hardware, and accessories are selected for low outgassing to protect sensitive processes. No painted components, PVC, or materials with high VOC emission are used in cleanroom rack builds.
All surfaces are smooth, flush, and free of horizontal ledges that trap particulate. Lane rails, frame joints, and fasteners are designed for complete IPA and cleanroom-compatible detergent wipe-down without disassembly.
All fasteners are 316 stainless steel to prevent corrosion particle generation in high-humidity cleanrooms and to withstand repeated exposure to isopropyl alcohol and hydrogen peroxide cleaning agents.
Cleanroom racks handling ESD-sensitive components are supplied with ESD-dissipative lane surfaces and a grounding lug connection to the facility ground plane, combining cleanroom material compliance with electrostatic discharge protection.
Rack design documentation includes material certifications, outgassing test reports, and particle generation assessments suitable for inclusion in ISO 14644 cleanroom qualification and validation records.
Anodized aluminum T-slot; no paint or coating
Compatible with ISO Class 5–8 environments
316 stainless steel throughout
Anodized aluminum or ESD-dissipative roller track
IPA, H2O2, cleanroom detergents
Low-outgassing materials; test reports available
Dissipative lane surface + grounding lug
Material certs, outgassing reports, design drawings
Hard anodized and sealed; no ledges or crevices
Component staging, cassette flow lanes, and reticle transport racks in ISO Class 5–7 semiconductor fabrication cleanrooms.
PCB and SMT component flow lanes in ISO 6–8 electronics cleanrooms where ESD and particle control are simultaneous requirements.
Material staging and component presentation racks in ISO 7–8 pharmaceutical manufacturing cleanrooms subject to cGMP cleaning protocols.
Precision optics component staging racks where particle contamination during handling would require rework or rejection of high-value components.
Modular Solutions cleanroom flow racks are compatible with ISO Class 5 through ISO Class 8 environments as defined by ISO 14644-1. The material and finish selection, fastener specification, and surface geometry are designed to meet the cleanliness requirements of these classes. For ISO Class 4 or below, consult our engineering team for a custom material review.
Yes. Anodized aluminum profiles and 316 stainless steel fasteners are compatible with hydrogen peroxide vapor and vaporized hydrogen peroxide cleaning cycles. Lane hardware and accessories are specified to withstand repeated HPV/VHP exposure. Any ESD-dissipative components are specified from HPV-compatible materials.
Yes. Material certifications for aluminum alloy, anodizing specification, fastener grade and material, and lane hardware are supplied with every cleanroom rack order for inclusion in facility qualification records.
Yes. Cleanroom-compatible kanban card holders in anodized aluminum or cleanroom-grade polycarbonate are available as T-slot accessories. Standard plastic card holders are not used in cleanroom builds.
In most cases, no. Cleanroom specification requires non-painted frame profiles, stainless steel fasteners, and specific lane hardware from the point of manufacture. Retrofitting a standard painted rack would require complete disassembly and rebuild. It is more cost-effective to order a cleanroom-specified rack from new.
Share your ISO class requirement, container dimensions, lane configuration, and cleaning protocol — we will design a cleanroom rack that meets your facility qualification requirements.
Request a Quote