Humidity-Controlled Enclosures
Moisture is one of the most damaging and least-controlled variables in manufacturing environments. Our modular aluminum humidity-controlled enclosures create a sealed, managed-humidity zone around moisture-sensitive processes, materials, and equipment — preventing corrosion, dimensional instability, delamination, and process failures caused by uncontrolled relative humidity on the production floor or in storage.
Request a Quote Talk to an Engineer
Humidity Control Enclosure Features
Sealed construction, gasketed joints, and integrated humidity management provisions give these enclosures the ability to maintain tight RH tolerances independent of plant floor conditions.
Airtight Sealed Construction
Gasketed aluminum panel-to-frame joints on all four walls, ceiling, and base channel create an airtight envelope that prevents uncontrolled moisture infiltration from the surrounding plant environment.
Dehumidifier Integration Provisions
Structural provisions for inline dehumidifiers, desiccant systems, and condensate drain lines are built into the enclosure design — not added as an afterthought.
Humidity Monitoring Port Provisions
Dedicated pass-throughs for RH sensors, data loggers, and humidity alarm systems allow continuous monitoring and documentation of enclosure conditions.
Combined Temperature & Humidity Control
Insulated panel options allow simultaneous temperature and humidity control — maintaining both parameters to the tight tolerances required for precision manufacturing and pharmaceutical applications.
Corrosion-Resistant Aluminum Construction
Aluminum extrusion framing and panels resist corrosion in high-humidity environments — unlike steel structures that rust and degrade when exposed to the moisture levels these enclosures contain.
Modular & Reconfigurable
Bolted panel construction allows the enclosure to be expanded, reconfigured, or relocated when process or floor plan changes — no demolition or replacement required.
Humidity Control Applications
Humidity-controlled enclosures are required wherever moisture variability causes process failures, material degradation, or measurement errors.
- Electronics & PCB Assembly — Low-humidity enclosures for moisture-sensitive component storage and assembly operations preventing solder joint failures and component damage from ambient moisture absorption.
- Pharmaceutical & Life Sciences — Controlled RH environments for moisture-sensitive drug formulation, packaging operations, and laboratory work requiring documented humidity compliance.
- Precision Gauge & Fixture Storage — Low-humidity storage enclosures preventing surface corrosion on precision steel gauges, check fixtures, and calibration artifacts between use cycles.
- Composite & Adhesive Processing — Controlled humidity work cells for composite lay-up, adhesive bonding, and surface preparation operations sensitive to moisture-induced cure variation.
- High-Humidity Process Containment — Positive-humidity enclosures for curing, conditioning, and testing operations that require elevated RH conditions isolated from surrounding dry plant areas.
- Battery & Energy Storage Manufacturing — Ultra-low humidity dry rooms and enclosures for lithium-ion cell assembly and electrode processing requiring <1% RH conditions.
Construction & Specification Details
Humidity-controlled enclosures are configured to your target RH range, process footprint, and facility requirements.
- Frame: 45–90 mm aluminum T-slot extrusion; corrosion-resistant anodized finish standard.
- Panels: Insulated composite (R-10 to R-20) for combined temperature/humidity; solid aluminum for humidity-only applications.
- Gaskets: Continuous EPDM gaskets on all panel-to-frame joints and door frames; compression-seal door hardware standard.
- RH Range: 5–95% RH depending on dehumidifier/humidifier equipment selected; enclosure designed for target range.
- Monitoring Provisions: Dedicated sensor ports, data logger cable pass-throughs, and alarm output provisions.
- Drain: Condensate drain provisions for dehumidifier integration; sloped floor provisions available.
- Lead Time: 3–6 weeks from approved process layout and RH specification.
Design Your Humidity-Controlled Enclosure
Tell us your target RH range, process footprint, and sensitivity requirements — our engineers will design a sealed enclosure with the right humidity management provisions for your application.
Request a Quote Talk to an Engineer