Paint & Powder Coating Booths
Industrial spray finishing and powder coating generate solvent vapors, paint overspray, and fine powder that require enclosure, ventilation, and fire suppression provisions to meet NFPA 33 and OSHA standards. Our modular aluminum booths are engineered with the airflow, filtration, and construction requirements for spray paint and powder coating operations — custom-sized for your part dimensions, spray equipment, and production volume.
Engineered for Spray Finishing Safety
A finishing booth must manage airflow, contain overspray, meet fire code, and provide a controlled environment for a consistent finish — all in a structure sized to your parts and process.
Engineered Cross-Draft Ventilation
Inlet plenum and exhaust filter wall sizing engineered to the airflow velocity required by NFPA 33 for the solvent load and booth volume — ensuring proper vapor dilution and overspray capture.
Powder Coating Booth Construction
Non-sparking aluminum framing and grounding provisions for powder coating booths — meeting NFPA 33 requirements for electrostatically applied coatings with provisions for powder reclaim systems.
NFPA 33 Fire Code Provisions
Booth construction designed to NFPA 33 requirements with fire suppression system mounting provisions, explosion-relief panels, and electrical classification provisions for Class I or Class II locations.
Exhaust Filter Systems
Fiberglass filter bank, paint arrest pad, or water wash panel exhaust filtration capturing overspray before it reaches the exhaust fan and recirculation or discharge point.
Full Part Access
Wide double-swing or sliding entry doors, monorail provisions, and forklift clearance dimensions accommodate the largest parts in your production mix without workflow compromise.
Lighting & Observation
Sealed LED light fixture provisions and polycarbonate observation panels provide the foot-candle levels required for finish quality inspection during and after application.
Paint & Powder Coating Booth Applications
Industrial finishing booths are required wherever spray-applied coatings generate hazardous vapors, fire risk, or overspray that must be contained and managed.
- Liquid Spray Paint Booths — Cross-draft and downdraft booth configurations for solvent-based and waterborne spray paint operations on fabricated metal, plastic, and composite parts.
- Powder Coating Booths — Electrostatically applied powder coating booths with grounding provisions, powder reclaim system connections, and NFPA 33 Class II location construction.
- Touch-Up & Repair Booths — Smaller finishing enclosures for spot repair, touchup coating, and prototype finishing operations where a full production booth is not required.
- Automotive & Refinishing Booths — Vehicle and large-part finishing booths with drive-in access, full-length lighting, and filtered fresh air supply for automotive refinishing.
- Aerospace Coating Booths — Clean, temperature-controlled finishing enclosures for aerospace primer and topcoat application where surface contamination affects coating adhesion and performance.
- Multi-Process Finishing Cells — Combined wash, dry, and coating booth sequences with monorail or cart conveyance provisions for high-volume production finishing lines.
Standard Options & Specifications
Paint and powder coating booths are specified to your part size, solvent load, and fire code requirements:
- Airflow Design: Cross-draft and downdraft configurations; 60–100 FPM face velocity typical per NFPA 33.
- Frame: Non-sparking aluminum T-slot framing; grounding provisions standard on all booth structures.
- Filtration: Fiberglass filter bank, paint arrest pad, or water wash options for exhaust filtration.
- Fire Code: NFPA 33 construction provisions; explosion relief panel options; fire suppression mounting provisions.
- Electrical Classification: Class I Division 1 or Division 2 provisions for solvent-based spray operations.
- Entry Doors: Single swing, double swing, sliding; forklift-clearance options; monorail pass-through provisions.
- Lead Time: 4–8 weeks from approved part dimensions, solvent data, and fire code requirements.
Design Your Finishing Booth
Share your part dimensions, coating process, and production volume — we'll engineer a booth that meets your finish quality and code compliance requirements.
Email Us for a Quote Contact FormModular Solutions — 4280 Giddings Rd, Auburn Hills, MI 48326 | 248-625-1864