Woodworking & CNC Light Enclosures
CNC routers and automated woodworking equipment generate chips, dust, and acoustic noise that affect operator safety, downstream air quality, and adjacent operations. Our CNC light enclosures are purpose-built for dust containment in woodworking and panel processing environments — with polycarbonate visibility panels for unobstructed machine monitoring, EPDM-sealed frames, integrated vacuum hose ports, and large-format access doors for tooling changes and material loading.
Purpose-Built for CNC Dust Environments
A standard guarding panel doesn’t seal against fine wood dust. Our CNC enclosures use EPDM perimeter seals and lapped panel joints to contain dust at the source before it reaches the facility air.
EPDM Perimeter Sealing
Continuous EPDM gasket seals at every panel joint and door frame create a dust-minimizing barrier. Fine MDF and hardwood dust is contained at the source rather than distributed through facility air.
Polycarbonate Visibility Panels
Full-height 6 mm clear polycarbonate panels on one or more sides provide unobstructed sightlines to the cutting area during operation. Panels are impact-rated and chip-resistant.
Chip Deflection Design
Angled interior panel profiles and chip deflection rails direct chips down toward the machine base rather than allowing accumulation on horizontal surfaces where they create housekeeping and slip hazards.
Vacuum & Cable Ports
Framed port openings for dust collection hoses (2”–8” diameter) and cable management pass-throughs are engineered into the panel layout at the correct height for your machine and collector configuration.
Large-Format Access Doors
Full-height hinged or sliding access doors on one or both ends allow sheet material loading, tooling changes, and maintenance access without removing panels or disassembling any part of the enclosure.
Overhead Plenum Option
An integral overhead plenum connects to your dust collector and draws air uniformly across the cutting zone, improving collection efficiency compared to single-point floor-level pickup.
CNC Enclosure Applications
Any woodworking or panel-processing machine that generates fine particulate benefits from a purpose-built enclosure rather than open-air operation or improvised barriers.
- CNC Router Shops — Enclosed cutting zones for nested-based routers, gantry routers, and 5-axis machining centers processing MDF, plywood, hardwood, and composite panel materials.
- Panel Saws & Beam Saws — Partial enclosures for panel saw outfeed zones, containing fine sawdust that bypasses the machine’s integrated guards and escapes into the facility.
- Vocational Woodshop Programs — School and community college CTE programs where machine enclosures both improve safety compliance and reduce HVAC dust loading in shared academic facilities.
- Automated Sanding Lines — Wide belt sander and drum sander enclosures where fine abrasive dust is a respiratory and housekeeping concern throughout the production floor.
- Composite & Fiberglass Cutting — CNC enclosures for cutting fiberglass, carbon fiber, and composite panels where respirable fiber content makes open-air machining unacceptable.
- Plastics & Sign Fabrication — Light enclosures for CNC routing of acrylic, PVC, and HDPE sheet stock where chips and static-charged fines create housekeeping problems on production floors.
Specification Highlights
- Frame: 6000-series aluminum T-slot extrusion; heavy-duty 45-series or 90-series profiles for large machine footprints.
- Sealing: EPDM continuous gasket at all panel joints, door frames, and perimeter connections; lapped panel joints on fixed walls.
- Panel Infill: Solid aluminum panels (standard), 6 mm clear polycarbonate (visibility sides), or a combination — interchangeable in the same frame.
- Doors: Hinged or sliding single/double-leaf; full-height for material loading; latching handles standard.
- Vacuum Ports: Custom-sized port frames from 2” to 8” diameter with flexible boot or rigid duct collar options.
- Overhead Plenum: Optional integrated plenum with duct collar sized to your dust collector CFM requirements.
- Assembly: Bolted T-slot connections — no welding, fully reversible, reconfigurable when machines move or change.
- Lead Time: 4–6 weeks from approved drawings for standard CNC enclosure configurations.
Get a CNC Enclosure Quote
Share your machine footprint, material types, dust collection configuration, and access requirements — we’ll engineer an enclosure that fits your machine and your shop.
Email Us for a Quote Contact FormModular Solutions — 4280 Giddings Rd, Auburn Hills, MI 48326 | 248-625-1864